Sensor Highway(R) Compatible Model 1136 Series High Reliability Industrial Accelerometer The model 1136 series accelerometers offer high reliability in industrial FM Approved environments. An integral cable includes strain relief for superior flex and pull strength, and is available with a top or side exit configuration. Low profile design, thermal boot and watertight construction make this sensor perfect for moderate to harsh applications. All models include a 1/4-28 removable stud to facilitate installation. Ordering Information Operating Specifications Sensitivity Frequency Range 1dB @ 100 Hz 5% 10% 3 dB Turn-On Time (2% of final bias) Amplitude Range Mounted Resonance (Nominal) Transverse Sensitivity Noise Broadband 2.5 Hz to 25 kHz Spectral 10 Hz 100 Hz 1000 Hz Output Impedance Noise Rejection (EMI/RFI) Ground Isolation Bias Volts (nominal) Power Requirements Temperature Range Maximum Shock Base Strain English 100 mV/g 1.5 Hz to 3 kHz 1 Hz to 5 kHz .5 Hz to 10 kHz <2 seconds 50 g 18 kHz <5% Metric 10.2 mV/(m/s2) Model 1136 (Pigtail, side).................................P/N 9356378-XXX Model 1136B (BNC, side).................................P/N 9356528-XXX Model 1136T (Pigtail, top)................................P/N 9356575-XXX Model 1136TB (BNC, top).................................P/N 9356574-XXX Model 1136FM (Pigtail, side, FM approved)......P/N 9356825-XXX Model 1136BFM (BNC, side, FM approved)......P/N 9356871-XXX Model 1136TBFM (BNC, top, FM approved)......P/N 9357064-XXX Substitute cable length in feet for XXX Sensors Include: NIST Calibration * Thermal Boot * Mounting Stud 1 Year Warranty * Manual 250 g (rms) 12 gHz 5 gHz 2 gHz 100 >-52 dB (int. Faraday Shield) Case Isolated, 100 Meg 12 24-30 Vdc @ 1-6 mA cc -10F to +200F -20C to 95C 5,000 g .008 g peak/ Typical Frequency Response Physical Specifications Weight (nom): 1136....................................................50 grams without cable 1136T..................................................90 grams without cable Cable Pull Strength..............................................40 lbs minimum Material.......................................6061 Aluminum with aluminum oxide chemical resistant coating Design..........................................................Isolated Compression Seal...............................................................................Waterproof Physical Dimensions 1136...............................1.5" ht x 1.0" hex base (3.8 x 2.5 cm) 1136T...........................2.25" ht x 1.0" hex base (5.8 x 2.5 cm) Mounting..................................................1/4 - 28 removable stud Mounting Torque.............................................35 in-lb (40 cm-kg) Model 1136/1136T Outline Drawing 1.0" 1136 FREQUENCY RESPONSE 3 1.5" 2 1 10 FT dB 0 -1 1.5" Hex Base 1/4-28" Removable Stud -2 -3 0.5 10 100 F R E Q U E N C Y (Hz) 1K 10K Top View For Turn-On Time discussion, see AN123 FM Approved Vibra*Metrics Vibra * Metrics Model 1136 is certified Intrinsically Safe for use in hazardous environments. Factory Mutual approval is Class I, II, & III, Division I, Groups A, B, C, D, E, F, & G. For more information, see "Certified Intrinsically Safe" Applications Note, AN114. (R) A Member of MISTRAS Holdings Group Your Predictive Maintenance Partner 195 Clarksville Road, Princeton Junction, New Jersey 08550 USA Tel: 609-716-4130 * Fax: 609-716-0706 * Website: www.vibrametrics.com * Email: sales@vibrametrics.com Rev. 9/02. Due to continual improvement, Vibra*Metrics reserves the right to amend this specification without notification.